J杭州炬卡电器有限公司Solar Cold Chain Refrigeration Get a Quote
Plug into the Sun

Solar Cold Chain.
Off-Grid Reliable.

杭州炬卡电器有限公司 designs and manufactures photovoltaic cold-chain equipment: solar freezers, solar refrigerators, solar ice makers and mobile solar retail carts — supported by a complete spare-parts and CKD/SKD programme.

Solar Direct-Drive DC 12V / 24V 110 mm Foaming CKD / SKD / OEM
Solar powered freezer installation
Solar freezer powered directly by a photovoltaic array — no battery required in the day-only configuration.
2015Year established
96Solar / DC models
4Solar power scenarios
30+Design advantages
Product Range — Primary

Solar freezers, refrigerators and cold-chain equipment

Our core range is built for areas with strong sunshine, no mains power, or expensive mains power. Every solar model below is taken from our current solar freezer and spare-parts catalogue, with the model image matched to the model number.

Four Solar Power Scenarios

Choose the power architecture that fits the site

We match the cabinet to the actual site conditions — sunshine hours, mains availability and mains stability — instead of selling one fixed configuration.

Day-only solar freezer
SCENARIO 1 Day-time photovoltaic only

For sites that only need cooling during daylight, such as display cabinets, with excellent sunshine and no mains power — or very expensive mains power. Cabinet + PV panels, running straight from the sun.

Solar with external AC/DC adaptor
SCENARIO 2 PV by day, mains by night

For sites that have mains power but do not want to buy batteries, or want to reduce running cost. Cabinet + PV panels + external AC/DC adaptor, switching automatically at night.

Solar with built-in lithium battery
SCENARIO 3 PV + built-in lithium battery

For sites with no mains power at all. The cabinet carries a built-in lithium battery; the PV array runs the cabinet and charges the battery by day, and the battery takes over at night — fully automatic.

Hybrid three-source solar power
SCENARIO 4 Hybrid three-source switching

For sites with mains power that suffers frequent outages. PV by day while charging the battery; mains has priority at night; when mains fails, the built-in battery takes over automatically.

Featured Models

Representative solar and DC platforms

A cross-section of the solar range — foam-door chest freezers through to solar air conditioners and ice makers. Full specifications are available on each model page.

View All Solar & DC Models
Why Our Cabinets Last Longer

Engineering detail you can compare, part by part

More than thirty design advantages separate our cabinets from the general market. These are the ones buyers ask about most often.

Non-exposed door lock hook

A unique concealed lock hook — nothing protrudes, the finish stays clean and the handle line looks premium.

0.4 mm shell / 0.32 mm liner

Thicker than the usual market build of 0.35 mm outer shell and 0.26 mm inner liner, for a stiffer, longer-lived cabinet.

Custom LG130 door frame

A purpose-made low-temperature frame material that resists cracking under the large temperature difference between inside and outside.

All-metal compressor room

No calcium-plastic board and no cardboard in the compressor compartment — better durability and flame resistance.

6.0 mm condenser tube

A 6.0 mm tube instead of the common 4.78 mm, with 120 denser wires on the BD/BC-208 for noticeably better heat dissipation.

100 % copper motor coils

Compressor motor windings are guaranteed copper, and every compressor controller uses a large aluminium housing for better heat removal.

Pure white nylon castors

No regrind material in the wheels — they stay smooth and last far longer under daily movement.

10-year LED corn lamp

A high-grade LED corn lamp inside the cabinet, rated for around ten years of service, with far lower power draw than a tube.

See How We Build and Test
Foaming production line
Manufacturing

A full-process factory, not an assembly shop

杭州炬卡电器有限公司 was established in 2015 and works on combining solar application, internet-plus and new energy with refrigeration. We are a designer and manufacturer of photovoltaic cold-chain equipment — not a trading company.

  • Fully automatic laser cutter, punch press and bending machine.
  • Automatic dual-gun high-pressure foaming machine.
  • CACL high-precision dual-system filling machine.
  • INFICON high-sensitivity leak detector on every unit.
  • Foaming room held at a constant 20–23 °C all year round.

Because we control every process in-house, customisation and small batch orders are practical: cabinet colour, handle style, panel design, mechanical or electronic control, external or built-in condenser.

Tour the Workshop
CKD and SKD kits for local assembly
CKD / SKD / OEM

Assemble locally. Build your own factory.

We supply complete machines, semi-knocked-down and completely-knocked-down kits covering foam-door freezers, curved and flat glass door cabinets, island cabinets, large freezers, display cabinets, cake cabinets, refrigerators, air conditioners and more.

Beyond the kits themselves, we help partners set up refrigeration assembly plants in their own market and train their workers — because a local factory creates local jobs and shortens the supply chain.

Spare Parts & Kits
Secondary Range — Listed Separately

AC commercial refrigeration (mains powered, not solar)

Alongside the solar programme we supply a conventional AC commercial refrigeration range for markets with a stable electricity supply. These cabinets are AC 220 V / 50 Hz products and are not solar products, so they are kept in their own separate section and are never mixed into the solar range.

View the AC Range

Tell us the site, and we will spec the system

Send the destination country, sunshine conditions, mains situation, model and quantity — we will come back with a matched solar configuration and quotation.

Start an Enquiry